You are currently viewing Heavy Duty Hauling from NJ to PA

Heavy Duty Hauling from NJ to PA

  • Post author:
  • Post category:Blog

Heavy Duty Hauling for CZM Drill Urgently Needed for Job in PA

The skilled and experienced team at Falzone Towing was recently called by a customer who required heavy duty hauling. The task was no small feat: they needed to pick up a CZM drill rig from a dealership in New Jersey and transport it all the way to a job site in Pennsylvania. But here’s the catch – time was of the essence. Without this colossal piece of machinery, the job in Pennsylvania would be put on hold indefinitely.

The Falzone team hit the road with a tri-axle tractor and a quad-axle 60-ton lowboy to make sure the job was completed quickly and safely. However, transporting a massive piece of equipment like this requires a lot of preparation, skill, and patience.

The Falzone Towing office personnel put in Oversize Load permits for each state the heavy-duty load had to pass through ahead of time. Once the permits were approved, the lowboy and tractor were sent out to prepare for transport. The load was then chained down and made ready for its journey through the different states.

The challenge of the job didn’t stop there though – once on the road, the operator had to carefully follow the approved roads listed on the permit because these loads are wider, longer, taller, and heavier than most vehicles on the road.

It takes a lot of concentration and expertise to navigate from one location to another, but thankfully, the heavy duty hauling pros from Falzone successfully completed this heavy duty towing job in just 10 hours! Great job yet again, Falzone Towing! 

Details of Heavy Duty Hauling for CZM Drill Urgently Needed for Job in PA

Falzone Towing recently helped a customer with heavy duty hauling. The client needed a CZM drill rig picked up at a dealership in New Jersey and taken to a job site in Pennsylvania. It was important for this heavy duty hauling job to be done in a timely manner because without this machine, the job in Pennsylvania would be halted.  

The customer needed the equipment to be brought from Mount Ephraim, NJ to Hamburg, PA via heavy duty hauling. Falzone Towing responded to this heavy duty hauling job along with a tri-axle tractor and quad-axle 60-ton lowboy. 

To safely and timely execute heavy duty hauling, it requires office personnel to put in Oversize Load permits for each state traveled the heavy duty hauling load travels through. Once these permits are approved, the proper lowboy and tractor are sent out to prep for transport.

The heavy duty hauling load is chained down and prepared for transportation through the states. Once the heavy duty hauling load is ready for transport, the operator needs to read off the permit to safely follow approved roads to travel from NJ to PA. 

When these heavy duty hauling loads are transported they are wider, longer, taller, and heavier than most vehicles on the road. As such, it takes a lot of patience and skill to navigate from one location to another. Thankfully, the heavy duty hauling pro from Falzone Towing successfully completed this job in 10 hours.